Produkter
Webbutik Kampanjer Aktiviteter

Produkter  /  Mätgivare  /  Givare för anläggningssektorn  /  

Förskjutningsgivare för anläggningssektorn

Se nedan tabell över förskjutningsgivare. Specialgivare för bygganläggningssektorn.

Artikelnummer

Beskrivning och PDF

Bild

BJ-AT

Joint Transducers. Suitable to check concrete blocks for opening at the joint.

Embedded across a joint of adjoining concrete blocks, the BJ-AT series joint transducers measure an opening between blocks. A temperature measuring function enables simultaneous measurement of displacement and temperature. In addition, for measurement of cracks of concrete or rock-bed, a dedicated receptacle allows embedment in concrete and mounting legs or fixtures enable surface installation.

Produktdatablad BJ-AT »

BJB-C-S, D-S, E-S

Displacement Transducers. 3 models are available for selection of the most suitable one.

The BJB-C-S, BJB-D-S and BJB-E-S series displacement transducers are used as detectors for measurement of rock-bed displacement and ground settlement. Varieties of models are available for selection of the most suitable one based on the measuring range, dimensions and field situations.

Produktdatablad BJB-C-S, D-S, E-S »
BCD-E-70S

Concrete Surface Displacement Transducer. For indoor testing of concrete loads.

The BCD-E-70S is a surface displacement transducer developed for indoor testing of concrete loads.

Produktdatablad BCD-E-70S »
BCD-5B

Crack Displacement Transducer. Easy to install even on a weak rock-bed for accurate measurement.

The BCD-5B crack displacement transducer is designed to measure cracks occurring in concrete structures and rock-beds of mines and quarries. Conventional crack displacement transducers have large measuring force and cannot ensure high measuring accuracy unless mounted sturdily. Furthermore, they are difficult to install on a weak rock-bed. By contrast, the BCD-5B provides an extremely small measuring force and is easy to install even on a weak rock-bed for accurate measurement.

Produktdatablad BCD-5B »
DTP-E-S

Dripproof Large-capacity Displacement Transducers. Suitable for large displacement by dripproof structure.

The DTP-E-S series are potentiometer-based transducers for measurement of large displacement. A drip-proof structure enables applications where they may be splashed with water or involving highly humid environment.

Produktdatablad DTP-E-S »
BRD-AT

Rock-bed Compression Displacement Transducers. Suitable for compressive changes of rock-bed and enables measurement of upheaval.

The BRD-AT series rock-bed compression displacement transducers are designed to measure compressive changes of rock-bed. They detect relative displacement between the ground surface and the anchor fixed to the bottom of a boring. A temperature measuring function enables simultaneous measurement of displacement and temperature. Zero balance adjustment at the time of installation enables measurement of upheaval, and thus they can be used for rock-bed grout management.

Produktdatablad BRD-AT »

 

Sök

Skriv in det du vill söka efter här