Produkter
Webbutik Kampanjer Aktiviteter

Produkter  /  Mätgivare  /  Givare för anläggningssektorn  /  

Lutningsgivare för anläggningssektorn

Se nedan tabell över lutningsgivare. Specialgivare för bygganläggningssektorn.

Artikelnummer

Beskrivning och PDF

Bild

BKJ-A

Embedment Type Inclination Transducers.

Small-sized and lightweight 27 mm in outer diameter. Inclination angles detected at multiple stages enable measurement of lateral displacement of the ground or earth retaining wall.

The BKJ-A series inclination transducers are designed for embedment at multiple stages in a boring or earth retaining wall. Inclination angles detected at mutiple stages enable measurement of lateral displacement of the ground or earth retaining wall. Since the embedment method ensures quicker measurement than the insertion method, the BKJ-A series is suitable for use in information-oriented urban civil engineering fields. The BKJ-A series can be installed at maximum 20 stages in an aluminum guide pipe embedded beforehand.

Produktdatablad BKJ-A »

BKL-A

Guide Roller-equipped Inclination Transducers.

Inclination angles detected enable measurement of lateral displacement of the ground or earth retaining wall.

The BKL-A series inclination transducers are designed for embedment at multiple stages in the ground or earth retaining wall. Inclination angles detected at multiple stages enable measurement of lateral displacement of the ground or earth retaining wall. Guide rollers provided ensure smooth installation in an aluminum guide pipe embedded beforehand, and no grouting work in the guide pipe is required.

Produktdatablad BKL-A »

BK-G

Insertion Type Inclination Transducers.

Inclination angles detected enable measurement of lateral displacement of the ground or earth retaining wall.

BK-G series inclination transducers are designed for insertion in guide pipe embedded beforehand, in the ground or the structure, detect successive inclination angles and measure lateral displacement. And are indispensable to check for landslide or earth retaining wall, many use for lateral displacement of the ground or earth retaining wall. 3 m cable to connect the cord reel and measurement devices is also included.

Produktdatablad BK-G »

BKK-A

Surface-mounting Type Inclination Transducers.

These transducers provide not only resolution twice as high as conventional systems but also outstandingly improved temperature characteristics and long-term stability.

The BKK-A series inclination transducers on surface of structure. available in two types, uniaxial and biaxial, are designed to measure minute inclination quantities. They are suitably used in combination with a structural settlement transducer for measurement of the disturbance resulting from nearby engineering works as well as for measurement of landslide-initiated inclination of the ground surface. These transducers provide not only resolution twice as high as conventional systems but also outstandingly improved temperature characteristics (temperature effect on zero balance ±0.36 seconds/°C with ±1° rated capacity) and long-term stability (±0.5% RO). Furthermore, a stopper for detector protection is provided to ensure high handling efficiency in a total working flow from transportation to installation and measurement. Also, their structure, with highly viscous damping oil filled in, improves vibration resistance.

Produktdatablad BKK-A »

Sök

Skriv in det du vill söka efter här