Till startsidan       Från givare till signalanalys

 

 Sök


Mätsystem - USB

Här finner du ett stort sortiment av MCC:s prisvärda sortiment av mätsystem för PC som ansluts via USB. Enheterna finns i många olika varianter med olika antal kanaler och olika konditionering för mätning av analog spänning, digitala nivåer, temperatur med mera.

 

I USB-sortimentet finner du beroende på modell:

- Samplingshastigheter upp till 2 MHz

- A/D upplösningar upp till 24 bitar

- Räknare, synkron sampling, isolering
och mycket mera..

Mätsystem USB

Till alla enheter medföljer windows drivrutiner med programmerings API. De flesta enheter stöder även Dasylab och Labview; undantag kan finnas för antingen väldigt gamla kort, eller nyutkomna modeller. Ett enklare program, TracerDAQ, för enklare mätningar följer också med.

 

 

 

> Beställning och prisinformation

 

Prisuppgifter hittar du i vår webbutik (öppnas i nytt fönster, ingen inloggning krävs)

 

Välkommen att maila in din beställning för snabb hantering. Du kan också lägga din beställning direkt i vår webbutik.

 

 

 

Paketerbjudande!  

Mätsystem med programvara och givare.

 

Se erbjudandet här »

Läs mer om mätsystemet här »

USB-2404-UI

 

 

 

> Sortiment: Mätsystem för USB

Tabellen nedan visar ett urval av produkter i vårt sortiment av mätsystem för USB-anslutning.

 

Nya modeller tillkommer regelbundet från våra leverantörer. Hittar du inte det du söker är du välkommen att kontakta oss.

 

Artikelnummer Beskrivning PDF
LGR-5325 Stand-alone, high-speed 100 kS/s, multifunction data logger; includes a 4 GB SD memory card, USB cable, and external power supply Manual »
LGR-5327 Stand-alone, high-speed 200 kS/s, multifunction data logger; includes a 4 GB SD memory card, USB cable, and external power supply Manual »
LGR-5329 Stand-alone, high-speed 200 kS/s, multifunction data logger with isolated digital inputs; includes a 4 GB SD memory card, USB cable, and external power supply Manual »
miniLAB 1008 USB-based DAQ device with eight 12-bit analog inputs, two analog outputs and 28 digital I/O lines Manual »
USB-1024HLS USB bus-powered digital I/O module with 24
high-current (64 mA sink, 15 mA source) digital I/O lines

Manual »

 

USB-1024LS USB bus-powered 24-channel digital I/O
module		 Manual »
USB-1208FS USB bus-powered DAQ module with 8 analog inputs, up to 12-bit resolution, 50 kS/s, two D/A outputs, and 16 digital I/O lines Manual »
USB-1208HS High-speed analog input module with eight 13-bit, 1 MS/s analog inputs Manual »
USB-1208HS-2AO High-speed multifunction module with eight 13-bit, 1 MS/s analog inputs and two 12-bit, 1 MS/s analog outputs Manual »
USB-1208HS-4AO  High-speed multifunction module with eight 13-bit, 1 MS/s analog inputs and four 12-bit, 1 MS/s analog outputs Manual »
USB-1208LS USB bus-powered DAQ module with eight 12-bit analog inputs, 1.2 kS/s, two analog outputs, and 16 digital I/O lines Manual »
USB-1608FS USB bus-powered DAQ module with eight, 16-bit analog inputs and eight digital I/O lines Manual »
USB-1408FS USB bus-powered DAQ module with eight analog inputs, up to 14-bit resolution, 48 kS/s, two analog outputs, and 16 digital I/O lines Manual »
USB-1602HS USB-based 16-bit, 2 MS/s simultaneous sampling analog input module Specifika-
tioner »
USB-1602HS-2AO USB-based 16-bit, 2 MS/s simultaneous sampling multifunction DAQ module Specifika-
tioner »
USB-1604HS USB-based 16-bit, 1.33 MS/s simultaneous sampling analog input module Specifika-
tioner »
USB-1604HS-2AO USB-based 16-bit, 1.33 MS/s simultaneous sampling multifunction DAQ module Specifika-
tioner »
USB-1608FS USB bus-powered DAQ module with eight, 16-bit analog inputs and eight digital I/O lines Manual »
USB-1608HS USB-based DAQ device with eight, 16-bit, simultaneous sampling analog inputs and 16 digital I/O lines Manual »
USB-1608HS-2AO USB-based multifunction DAQ device with eight, 16-bit, simultaneous sampling analog inputs, two 16-bit analog outputs, and 16 digital I/O lines Manual »
USB-1616FS USB-based analog and digital I/O device with 16 simultaneous sampling, 16-bit analog inputs, a counter, and 8 digital I/O lines Manual »
USB-1616HS  USB-based 1-MS/s, 16-bit multifunction module with eight differential or 16 single-ended analog inputs, four counter inputs, two counter outputs, and 24 digital I/O lines Manual »
USB-1616HS-2 USB-based 1 MS/s, 16-bit multifunction module with 8 differential or 16 single-ended analog inputs, two analog outputs, four counter inputs, two counter outputs, and 24 digital I/O lines

Manual »

USB-1616HS-4 USB-based 1-MS/s, 16-bit multifunction module with eight differential or 16 single-ended analog inputs, four analog outputs, four counter inputs, two timer outputs, and 24 digital I/O lines Manual »

USB-1616HS-BNC

Best-i-test finalist 2009 enligt Test & Measurement World

 

 USB-based 1 MS/s, 16-bit multifunction module with 16 differential, 16-bit analog BNC inputs, multiple ranges, 24 digital I/O lines, 4 counter inputs, and 2 counter outputs. Best-i-test finalist i T&MW 2009. Manual »
USB-2001-TC

Single-channel thermocouple measurement device for DAQFlex - Designed for OEMs.

Se bild »

 Specifika-
tioner »
USB-2404-10  USB-bus powered ±10 V, 24-bit, simultaneous sampling analog input device Manual »
USB-2404-60 USB-bus powered ±60 V, 24-bit, simultaneous sampling analog input device Manual »
USB-2404-UI Four channel, 24-bit universal analog input module with integrated signal conditioning Specifika-
tioner »
USB-2416 USB-based 24-bit, isolated, high-channel-count multifunction DAQ module Manual »
USB-2416-4AO  USB-based 24-bit, isolated, high-channel-count multifunction DAQ module Manual »
USB-2523  USB-based DAQ device with 16 single-ended/8 differential analog inputs, 1 MS/s throughput, 24 digital I/O lines, four 32-bit counter input channels, and four thermocouple inputs Manual »
USB-2527  16-channel analog input device, 1 MS/s throughput; 24 digital I/O lines; four 32-bit counter input channels; four 16-bit, 1 MS/s analog outputs Manual »
USB-2533 64 single-ended/32 differential analog inputs, 1 MS/s throughput; 24 digital I/O lines; four 32-bit counter input channels and 4 thermocouple inputs Manual »
USB-2537  64 single-ended/32 differential analog inputs; 1 MS/s throughput; 24 digital I/O lines; four 32-bit counter inputs; four 16-bit, 1 MS/s analog output channels; and 4 thermocouple inputs Manual »
USB-3101  USB-powered 4-channel, 16-bit, analog voltage output device Manual »
USB-3101FS 4-channel, 100 kS/s simultaneously updating analog output device Manual »
USB-3102 USB bus-powered 16-bit, 4-channel analog voltage/current output device Manual »
USB-3103 USB-powered 8-channel, 16-bit, analog voltage output device Manual »
USB-3104  USB bus-powered 16-bit, 8-channel analog voltage/current output device Manual »
USB-3105 USB-powered 16-channel, 16-bit, voltage output device, one counter, and eight digital I/O lines Manual »
USB-3106 USB-powered 16-channel, 16-bit, voltage/current output device Manual »
USB-3110 USB-based 16-bit, 4-channel high-drive analog output device Manual »
USB-3112 USB-based 16-bit, 8-channel high-drive analog output device Manual »
USB-3114  USB-based 16-bit, 16-channel high-drive analog output device Manual »
USB-4301 Low-cost, 9513-based, 5-channel counter/timer Manual »
USB-4302 Low-cost, 9513-based, 5-channel counter/timer with 37-pin D-Sub connectors—pin compatible with CIO- and PCI-CTR05 boards Manual »
USB-4303 Low-cost, 9513-based, 10-channel counter/timer Manual »
USB-4304 Low-cost, 9513-based, 10-channel counter/timer with two 37-pin D-Sub connectors—pin compatible with CIO- and PCI-CTR10 boards Manual »
USB-488 IEEE-488.2 interface for USB-compatible computers Manual »
USB-501 Battery-powered remote temperature logger Manual »
USB-501-LT Low-cost Temperature Data Logger Manual »
USB-501-TC Pocket sized thermocouple data logger Manual »
USB-501-PRO Battery-powered remote temperature logger with extended temperature range and stainless steel case

Manual »

 

Specifika-
tioner »

USB-502 Battery powered remote temperature and humidity logger Manual »
USB-502-LCD Battery-powered remote temperature and humidity logger with LCD display Manual »
USB-503 Battery-powered remote 0–30 VDC voltage logger Manual »
USB-504

Battery-powered remote 4–20 mA current loop logger

Manual »
USB-5201 8-channel thermocouple input temperature logger (CompactFlash) with high/low alarms, 8 digital I/O lines Manual »
USB-5203 USB-based 8-channel temperature logger (CompactFlash) supports 4 sensor types, with high/low alarms, 8 digital I/O lines Manual »
USB-7202 USB bus-powered DAQ module with eight, 16-bit analog inputs and eight digital I/O lines; for Message-Based DAQ - Designed for OEMs Specifika-tioner »
USB-7204  USB bus-powered DAQ module with 8 analog inputs, up to 12-bit resolution, 50 kS/s, two D/A outputs, and 16 digital I/O lines; for Message-Based DAQ - Designed for OEMs Specifika-tioner »
USB-DIO24/37 Low-cost, USB-bus powered, 24-channel digital I/O module with 37-pin D-Sub connector Manual »
USB-DIO24H/37 USB-powered digital I/O module with 24 high-current (64mA sink, 15mA source) digital I/O lines with 37-pin D-Sub connector Manual »
USB-DIO96H USB-based digital I/O device with 96 high-current output lines. Formerly USB-1096HFS. Manual »
USB-DIO96H/50 USB-based device with 96 high-current (24 mA source, 64 mA sink) digital I/O lines, uses 50-pin connectors Manual »
USB-ERB08 USB-based 8-channel electromechanical relay interface device Manual »
USB-ERB24 USB-based 24-channel electromechanical relay interface device Manual »
USB-PDISO8 USB-based 8 Form C relay and 8 isolated high-voltage input interface device Manual »
USB-PDISO8/40 USB-based 8 Form C relay and 8 isolated high-voltage input interface device with 40-pin connector Manual »
USB-QUAD08 Quadrature encoder (±12 V), Up to 48-bit resolution Manual »
USB-SSR08 USB-based solid-state 8 I/O module interface device Manual »
USB-SSR24 USB-based solid-state 24 I/O module interface device Manual »
USB-TC USB-based 8-channel thermocouple input module Manual »
USB-TC-AI USB-powered temperature (thermocouples only) and voltage measurement module Manual »
USB-TEMP USB-based 8-channel temperature measurement module supports 4 sensor types Manual »
USB-TEMP-AI USB-powered temperature (4 sensor types) and voltage measurement module Manual »
WLS-IFC USB-to-wireless interface module Manual »
WLS-TC Wireless-based 8-channel thermocouple input module; operates as a wireless and as a USB device Manual »
WLS-TEMP Wireless-based high-precision 8-channel temperature measurement module; operates as a wireless and as a USB device Manual »

 

Se vidare

Tillbaka till
Mätkort & Programvara 
för PC »

 

 

 

> Kataloger

Här hittar du kataloger över Measurement Computings sortiment. Observera att vissa villkor och garantier som nämns i katalogerna gäller endast inom USA, inte i Sverige.

 

Till katalogerna »

 

 

 

 

Huvudkontor/Försäljning/Service: 018-34 28 20, measurement@jor.se

Kontaktperson Göteborg: 070-655 09 96