Nedan ser du en tabell över stavelektroder från BIOPAC. Välkommen att kontakta oss för mer information!
Tips: Du kan söka pris på och beställa dessa i vår webshop. Snabbt och enkelt. Ingen inloggning krävs.
Dessa stavelektroder hittar du i webbutiken antingen genom att söka på respektive artikelnummer, eller under kategorin: "Medicinska produkter / Mätsystem".
« Tillbaka till: Elektroder, kablar och tillbehör till fysiologiska mätsystem från BIOPAC
| Artikelnummer |
Beskrivning |
Bild |
|
EL350S (Bar electrode, concave TP, shielded.)
EL350 (Bar electrode, concave, TP u/sh. )
|
All bar electrodes are nonferrous and consist of two tin electrodes in a watertight acrylic bar. The bar configuration permits easy electrode placement without disturbing electrode to electrode spacing. Bar electrodes are recommended for use when applying a stimulus, or recording a signal, during nerve conduction, somatosensory or muscle twitch recordings. When using bar electrodes for signal recording, a single ground lead (LEAD110 with EL503) is required.
When using the EL350S the "Shield" line should be placed into one of the two shield connectors on any biopotential amplifier. A ground lead is still required when using the EL350S.
The leads (3.8mm diameter x 61cm long) terminate in standard Touchproof connectors, which connect to any 100C-series Biopotential amplifier or stimulus isolation adapter (STMISOC/D/E). |
|
|
EL351 (Bar electrode, convex, TP u/sh.) |
All bar electrodes are nonferrous and consist of two tin electrodes in a watertight acrylic bar. The bar configuration permits easy electrode placement without disturbing electrode to electrode spacing. Bar electrodes are recommended for use when applying a stimulus, or recording a signal, during nerve conduction, somatosensory or muscle twitch recordings. When using bar electrodes for signal recording, a single ground lead (LEAD110 with EL503) is required. The leads [2.4mm (2 x 1.2mm) x 61cm long] terminate in standard Touchproof connectors, which connect to any 100C-series Biopotential amplifier or stimulus isolation adapter (STMISOC/D/E). |
|
; EffectiveNewWin.focus(); "Klicka för större bild!")
; EffectiveNewWin.focus(); "Klicka för större bild!")